How to Use the Border Buddie™ Wallpaper Border Tool
|
|
| Step 1: Assemble drip tray and wallpaper border support pin, choose the appropriate pin length 3", 6", or 9" for the different sizes of your wallpaper border. The wallpaper border pin should be at least half the height of the wallpaper border roll.
|
| Step 2: The wallpaper border pin should not exceed the height of the wallpaper border or it will push the wallpaper border away from the ceiling. This will make it difficult to cover the pin holes left from the mounting tacks. |
| Step 3: Paste the wallpaper border per instructions that come with your wallpaper border. |
| Step 4: When pasting the wallpaper border re-roll the wallpaper border in the direction that you want to hang the wallpaper border, try and roll the wallpaper border as tight as you can so the hole in the center is ½ inch or less in diameter. |
| Step 5: Put your wallpaper border on border support pin. |
| Step 6: Hold Border Buddie around drip tray using finger guides. |
| Step 7: To secure the Border Buddie to wall press firmly with fingers against back plate of drip tray, this is behind finger guides, this will set the pins into the wall and hold the Border Buddie with the roll of the wallpaper border. |
| Step 8: Apply the wallpaper border at desired height on wall or at ceiling using the Border Buddie to hold it to the wall. |
| Step 9: Stand back and admire the professional work you just finished in half the normal time and with less stress. |
